retropie does not show display to vga adapter

Connect the Touch interface of the LCD to the USB interface of the PC.Connect the HDMI port of the LCD to the PC.Power on the Raspberry Pi, please wait for a few seconds, and you can see the LCD display normally.If there is no signal in the LCD, please check the hardware connection, especially the FFC cable.If the displayed signal source is VGA or AV, you need to press the 'Source' button to choose one of them.Generally, you can see that the upper left corner of the LCD will display the signal source. Power on the main control board first.The hardware connection is shown in the following figure: Insert the TF card into the Raspberry Pi and connect the power adapter with 5V/3A.Connect the board to the 12V power adapter.Connect the Touch interface of the board to the USB interface of the Raspberry Pi.Connect the HDMI port of the board to the Raspberry Pi.Connect the HDMI main control board to the RGB interface of the 10.1inch Capacitive Touch LCD (F) with a 40pin FFC cable.Hdmi_cvt 1024 600 60 6 0 0 0 Hardware connection After the programming is completed, open the config.txt file in the root directory of the TF card, add the following code at the end of config.txt and save it. Open the Win32DiskImager software, select the system image prepared in step 1, and click write to burn the system image.Ĥ. Connect the TF card to the PC and use SDFormatter to format the TF card.ģ. Download the compressed file to the PC, and extract the img file.Ģ. Please download the latest version of the image from theġ. Supports Raspberry Pi OS / Ubuntu / Kali and Retropie systems on Raspberry Pi.

Support multi-language OSD menu (can be used for power control, adjusting brightness/contrast, etc.).Support various video input interfaces: HDMI, VGA and AV (CVBS).

Support common game consoles such as Microsoft XBOX360 and Nintendo switch.

Ubuntu is supported when used with Jetson Nano.

When used with Tinker Board 2, it supports Android / Debian.

When used as a computer monitor, it supports Windows 11/10/8.1/8/7.

When used with Raspberry Pi, it supports Raspberry Pi OS / Ubuntu / Kali and Retropie.

10-point capacitive touch control, tempered glass panel with the hardness up to 6H.

10.1-inch IPS screen with 1024 × 600 resolution.

Retropie does not show display to vga adapter